| 1 |
Design of novel superhydrophobic aniline trimer modified siliceous material and its application for steel protection
Ye YW, Zhao HC, Wang CT, Zhang DW, Chen H, Liu W
Applied Surface Science, 457, 752, 2018 |
| 2 |
Cost effective surface passivation film construction on Li4Ti5O12 anode of lithium ion batteries
Wu K, Qian L, Sun XN, Lei XL, Wu NN, Zhao HL, Zhang YC
Electrochimica Acta, 260, 40, 2018 |
| 3 |
Nitridation of silicon by nitrogen neutral beam
Hara Y, Shimizu T, Shingubara S
Applied Surface Science, 363, 555, 2016 |
| 4 |
Surface characteristics of ruthenium in periodate-based slurry during chemical mechanical polishing
Cheng J, Wang TQ, Jiang L, Lu XC
Applied Surface Science, 351, 401, 2015 |
| 5 |
Formation of alumina film using alloy catalyzers in catalytic chemical vapor deposition
Ogita YI, Saito N
Thin Solid Films, 575, 47, 2015 |
| 6 |
Reduction of surface recombination velocity by rapid thermal annealing of p-Si passivated by catalytic-chemical vapor deposited alumina films
Ogita YI, Tachihara M
Thin Solid Films, 575, 56, 2015 |
| 7 |
Chemical roles on Cu-slurry interface during copper chemical mechanical planarization
Li J, Liu YH, Pan Y, Lu XC
Applied Surface Science, 293, 287, 2014 |
| 8 |
Effect of acetic acid on wet patterning of copper/molybdenum thin films in phosphoric acid solution
Seo BH, Lee SH, Park IS, Seo JH, Choe H, Jeon JH, Hong M, Lee YU, Winkler J
Thin Solid Films, 519(20), 6806, 2011 |
| 9 |
Analyses of passivation films on lithium and lithium alloys by electrochemical quartz crystal microbalance
Honbo H, Momose H
Journal of Electroanalytical Chemistry, 638(2), 269, 2010 |
| 10 |
The importance of the active surface area of graphite materials in the first lithium intercalation
Novak P, Ufheil J, Buqa H, Krumeich F, Spahr ME, Goers D, Wilhelm H, Dentzer J, Gadiou R, Vix-Guterl C
Journal of Power Sources, 174(2), 1082, 2007 |
