| 1 |
CRITICAL EVALUATION OF MOMENTUM FLUX RATIO RELATIVE TO A LIQUID JET IN CROSSFLOW
Leask SB, McDonell VG, Samuelsen S
Atomization and Sprays, 28(7), 599, 2018 |
| 2 |
Flame downwash transition and its maximum length with increasing fuel supply of non-premixed jet in cross flow
Li X, Hu LH, Shang FJ
Energy, 164, 298, 2018 |
| 3 |
GEOMETRIC EFFECT ON SPRAY CHARACTERISTICS OF GAS-CENTERED SWIRL COAXIAL INJECTORS: RECESS RATIO AND GAP THICKNESS
Park G, Lee J, Lee I, Yoon Y, Sohn CH
Atomization and Sprays, 27(7), 579, 2017 |
| 4 |
MACROSCOPIC SPRAY CHARACTERISTICS OF A POROUS INJECTOR
Kim D, Lee I, Koo J
Atomization and Sprays, 24(1), 1, 2014 |
| 5 |
EXPERIMENTAL STUDY ON THE MERGED ANGLE BY SPRAY INTERACTION FROM PRESSURE-SWIRL ATOMIZERS
Yi Y, Hong M, Lee SY
Atomization and Sprays, 23(4), 279, 2013 |
| 6 |
Numerical investigation of the flow and flame structure in an axisymmetric trapped vortex combustor
Kumar PKE, Mishra DP
Fuel, 102, 78, 2012 |
| 7 |
INTERNAL FLOW CHARACTERISTICS OF LIQUID-LIQUID SWIRL COAXIAL INJECTORS WITH DIFFERENT RECESS LENGTHS AND OXIDIZER-FUEL RATIOS
Kim S, Yoon J, Yoon Y
Atomization and Sprays, 21(12), 971, 2011 |
| 8 |
An experimental study of heat transfer in a two-dimensional T-junction operating at a low momentum flux ratio
de Tilly A, Sousa JMM
International Journal of Heat and Mass Transfer, 51(3-4), 941, 2008 |
| 9 |
Primary break-up of a viscous liquid jet in a cross airflow
Birouk M, Azzopardi BJ, Stabler T
Particle & Particle Systems Characterization, 20(4), 283, 2003 |
