| 1 |
Length-to-Diameter Ratio of Extrudates in Catalyst Technology: III. Catalyst Breakage in a Fixed Bed
Beeckman JWL, Cunningham M, Fassbender NA, Datz TE
Chemical Engineering & Technology, 40(10), 1844, 2017 |
| 2 |
Length to diameter ratio of extrudates in catalyst technology I. Modeling catalyst breakage by impulsive forces
Beeckman JWL, Fassbender NA, Datz TE
AIChE Journal, 62(3), 639, 2016 |
| 3 |
Length to Diameter Ratio of Extrudates in Catalyst Technology II. Bending Strength versus Impulsive Forces
Beeckman JWL, Fassbender NA, Datz TE
AIChE Journal, 62(8), 2658, 2016 |
| 4 |
Correlations for saturated critical heat flux in microchannels
Wu Z, Li W, Ye SA
International Journal of Heat and Mass Transfer, 54(1-3), 379, 2011 |
| 5 |
A new predictive tool for saturated critical heat flux in micro/mini-channels: Effect of the heated length-to-diameter ratio
Wu Z, Li W
International Journal of Heat and Mass Transfer, 54(13-14), 2880, 2011 |
| 6 |
Experiments on the effects of multiple obstacles in vented explosion chambers
Park DJ, Lee YS, Green AR
Journal of Hazardous Materials, 153(1-2), 340, 2008 |
| 7 |
Experimental investigations of the Al 6082 alloy subjected to equal-channel angular pressing
Krallics G, Malgin D, Fodor A
Materials Science Forum, 473-474, 129, 2005 |
| 8 |
Air bubble generation through a submerged micro-hole
Shyu JC, Ding PP, Cheng WF, Chen PH
Chemical Engineering Research & Design, 80(4), 355, 2002 |
