| 1 |
On the Event-Triggered Controller Design
Ghodrat M, Marquez HJ
IEEE Transactions on Automatic Control, 65(10), 4122, 2020 |
| 2 |
Influence of the interference level and of the assembly process on the shear strength of loctite 648 anaerobic adhesive
Croccolo D, De Agostinis M, Fini S, Olmi G, Paiardini L, Robusto F
Journal of Adhesion, 96(1-4), 90, 2020 |
| 3 |
Cluster analysis of acoustic emission data to investigate the damage evolution in modified scarf joint under bi-axial loading
Destouesse J, Diakhate M, Badulescu C, Thevenet D, Stackler M, Albouy W, Carrere N
Journal of Adhesion, 96(11), 969, 2020 |
| 4 |
RETRACTION: Stress distribution in adhesively bonded scarf joint under thermo-mechanical loads
Jrad H, Mallek H, Bouhamed A
Journal of Adhesion, 95(2), 103, 2019 |
| 5 |
Fracture mechanics based joint capacity prediction of glued-in rods with beech laminated veneer lumber
Myslicki S, Vallee T, Bletz-Muhldorfer O, Diehl F, Lavarec LC, Creac'Hcadec R
Journal of Adhesion, 95(5-7), 405, 2019 |
| 6 |
Geometrical and material optimization of tensile loaded tubular adhesive joints using cohesive zone modelling
Ferreira LRF, Campilho RDSG, Rocha RJB, Barbosa DR
Journal of Adhesion, 95(5-7), 425, 2019 |
| 7 |
Extended finite element modelling of aluminium stepped-adhesive joints
Machado RMD, Campilho RDSG, Rocha RJB
Journal of Adhesion, 95(5-7), 450, 2019 |
| 8 |
Surface toughening - a concept to decrease stress peaks in bonded joints
Schollerer MJ, Kosmann J, Volkerink O, Holzhuter D, Huhne C
Journal of Adhesion, 95(5-7), 495, 2019 |
| 9 |
Experimental and 3D non-linear stress analysis of adhesively bonded pipes with curved-surface lap joints
Citil S, Bozkurt I, Aydin MD
Journal of Adhesion, 95(5-7), 515, 2019 |
| 10 |
Development of application method for fabricating functionally graded adhesive joints by two-component acrylic adhesives with different elastic moduli
Nakanouchi M, Sato C, Sekiguchi Y, Haraga K, Uno H
Journal of Adhesion, 95(5-7), 529, 2019 |
