| 1 |
Experimental research on propulsive performance of the pulse detonation rocket engine with a fluidic nozzle
Zhang QB, Wang K, Dong RX, Fan W, Lu W, Wang YJ
Energy, 166, 1267, 2019 |
| 2 |
Influence of air injection nozzles on filter cleaning performance of pulse-jet bag filter
Shim J, Joe YH, Park HS
Powder Technology, 322, 250, 2017 |
| 3 |
Analysis of the combined effect of hydrogrinding process and inclination angle on hydraulic performance of diesel injection nozzles
Salvador FJ, Carreres M, Jaramillo D, Martinez-Lopez J
Energy Conversion and Management, 105, 1352, 2015 |
| 4 |
Production of milk foams by steam injection: The effects of steam pressure and nozzle design
Jimenez-Junca C, Sher A, Gumy JC, Niranjan K
Journal of Food Engineering, 166, 247, 2015 |
| 5 |
Representation of a small-scale nozzle for gas-liquid injections into a fluidized bed on a large-scale grid
Pougatch K, Salcudean M, Reid K, McMillan J
Computers & Chemical Engineering, 62, 117, 2014 |
| 6 |
A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles
Molina S, Salvador FJ, Carreres M, Jaramillo D
Energy Conversion and Management, 79, 114, 2014 |
| 7 |
Transient measuring method for injection rate of each nozzle hole based on spray momentum flux
Luo FQ, Cui HF, Dong SF
Fuel, 125, 20, 2014 |
| 8 |
Study of the influence of the needle lift on the internal flow and cavitation phenomenon in diesel injector nozzles by CFD using RANS methods
Salvador FJ, Martinez-Lopez J, Caballer M, De Alfonso C
Energy Conversion and Management, 66, 246, 2013 |
| 9 |
The role of nozzle convergence in diesel combustion
Benajes J, Molina S, Gonzalez C, Donde R
Fuel, 87(10-11), 1849, 2008 |
| 10 |
The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles
Payri F, Bermudez V, Payri R, Salvador FJ
Fuel, 83(4-5), 419, 2004 |
