검색결과 : 10건
| No. | Article |
|---|---|
| 1 |
On the versatility and distinctiveness in the use of microwave energy for the ignition of low exothermic Ni-Ti intermetallics combustion synthesis Rosa R, Trombi L, Casagrande A, Cugini F, Leonelli C, Veronesi P Materials Chemistry and Physics, 233, 220, 2019 |
| 2 |
High entropy alloys obtained by field assisted powder metallurgy route: SPS and microwave heating Colombini E, Rosa R, Trombi L, Zadra M, Casagrande A, Veronesi P Materials Chemistry and Physics, 210, 78, 2018 |
| 3 |
Microwave processing of high entropy alloys: A powder metallurgy approach Veronesi P, Colombini E, Rosa R, Leonelli C, Garuti M Chemical Engineering and Processing, 122, 397, 2017 |
| 4 |
A review on combustion synthesis intensification by means of microwave energy Rosa R, Veronesi P, Leonelli C Chemical Engineering and Processing, 71, 2, 2013 |
| 5 |
The pO-Index and R Ratio Gap Methods for the Assessment of Corrosion Risk in Refractory Materials in Contact with Glass Melts Boccaccini DN, Cannio M, Romagnoli M, Veronesi P, Leonelli C, Boccaccini AR Journal of the American Ceramic Society, 93(5), 1355, 2010 |
| 6 |
Forming Silver Conductive Thick Films by Microwave Heating Hwang S, Veronesi P, Leonelli C, Kim H Journal of the American Ceramic Society, 93(10), 3201, 2010 |
| 7 |
Enhancing the Scratch Resistance of Polycarbonate With Poly(Ethylene Oxide)-Silica Hybrid Coatings Fabbri P, Messori M, Toselli M, Veronesi P, Rocha J, Pilati F Advances in Polymer Technology, 27(2), 117, 2008 |
| 8 |
Improvement of the surface properties of polycarbonate by organic-inorganic hybrid coatings Fabbri P, Leonelli C, Messori M, Pilati F, Toselli M, Veronesi P, Morlat-Therias S, Rivaton A, Gardette JL Journal of Applied Polymer Science, 108(3), 1426, 2008 |
| 9 |
Service life prediction for refractory materials Boccaccini DN, Cannio M, Volkov-Husoviae TD, Kamseu E, Romagnoli M, Veronesi P, Leonelli C, Dlouhy I, Boccaccini AR Journal of Materials Science, 43(12), 4079, 2008 |
| 10 |
Microwave thermal inertisation of asbestos containing waste and its recycling in traditional ceramics Leonelli C, Veronesi P, Boccaccini DN, Rivasi MR, Barbieri L, Andreola F, Lancellotti I, Rabitti D, Pellacani GC Journal of Hazardous Materials, 135(1-3), 149, 2006 |