| 1 |
The effect of neodymium on the microcracks generated on the Al-17.5Si alloy surface treated by high current pulsed electron beam
Hu L, Gao B, Zhu GL, Hao Y, Sun SC, Tu GF
Applied Surface Science, 364, 490, 2016 |
| 2 |
Surface tension of light rare earth fluoride molten salts electrolyte system
Zhu XP, Sun SC, Lu SD, Huang XX, Li KH, Tu GF, Huang XW, Huang SD
Thermochimica Acta, 636, 42, 2016 |
| 3 |
Study on the nanostructure formation mechanism of hypereutectic Al-17.5Si alloy induced by high current pulsed electron beam
Gao B, Hu L, Li SW, Hao Y, Zhang YD, Tu GF, Grosdidier T
Applied Surface Science, 346, 147, 2015 |
| 4 |
The effects of RE and Si on the microstructure and corrosion resistance of Zn-6Al-3Mg hot dip coating
Li SW, Gao B, Yin SH, Tu GF, Zhu GL, Sun SC, Zhu XP
Applied Surface Science, 357, 2004, 2015 |
| 5 |
A novel separation process for detoxifying cadmium-containing residues from zinc purification plants
Lu DK, Jin ZN, Shi LF, Tu GF, Xie F, Asselin E
Minerals Engineering, 64, 1, 2014 |
| 6 |
Investigations on rate constants of the charging/discharging processes for metal hydride electrodes
Zhang B, Wu WY, Bian X, Tu GF
Electrochimica Acta, 87, 645, 2013 |
| 7 |
Study on microstructure and electrochemical performance of the MlNi(3.55)Co(0.75-x)Mn(0.4)Al(0.3)(Cu0.75P0.25)(x) (x=0-0.5) composite alloys
Zhang B, Wu WY, Bian X, Tu GF
Journal of Power Sources, 236, 80, 2013 |
| 8 |
Surface modification of Al-12.6Si alloy by high current pulsed electron beam
Hao Y, Gao B, Tu GF, Cao H, Hao SZ, Dong C
Applied Surface Science, 258(6), 2052, 2012 |
| 9 |
Characterization of the structure of TiB2/TiC composites prepared via mechanical alloying and subsequent pressureless sintering
Wang HH, Sun SC, Wang DY, Tu GF
Powder Technology, 217, 340, 2012 |
| 10 |
Surface modification of Al-20Si alloy by high current pulsed electron beam
Hao Y, Gao B, Tu GF, Li SW, Hao SZ, Dong C
Applied Surface Science, 257(9), 3913, 2011 |
