| 1 |
Nonaqueous gel casting using multicomponent concentrated slurries through Michael additive reaction for fabricating silicon nitride dense ceramics
Iijima M, Hasegawa K, Tatami J
Advanced Powder Technology, 32(2), 472, 2021 |
| 2 |
3D structuring of dense alumina ceramics using fiber-based stereolithography with interparticle photo-cross-linkable slurry
Morita S, Iijima M, Chen YY, Furukawa T, Tatami J, Maruo S
Advanced Powder Technology, 32(1), 72, 2021 |
| 3 |
Hetero-assembly of colloidal particles in concentrated non-aqueous suspensions by polymer dispersant design
Morita S, Iijima M, Tatami J
Advanced Powder Technology, 31(2), 746, 2020 |
| 4 |
Dislocation-controlled microscopic mechanical phenomena in single crystal silicon under bending stress at room temperature
Yamaguchi H, Tatami J, Yahagi T, Nakano H, Iijima M, Takahashi T, Kondo T
Journal of Materials Science, 55(17), 7359, 2020 |
| 5 |
Simultaneous epoxy grafting on SiO2 nanoparticles during bead milling and their effects on the mechanical properties of epoxy-based composites
Iijima M, Tsutsumi T, Saito M, Tatami J, Moriya T, Kumada T, Izawa H
Advanced Powder Technology, 30(9), 1782, 2019 |
| 6 |
Design of nanoscale structured composite particles through mechanical process for fabricating a powder layer with rapid drying properties
Iijima M, Hayakawa M, Tatami J, Nakamura K, Nagashima S
Chemical Engineering Science, 203, 113, 2019 |
| 7 |
Microstructural control of green bodies prepared from Si-based multi-component non-aqueous slurries and their effects on fabrication of Si3N4 ceramics through post-reaction sintering
Morita S, Iijima M, Tatami J
Advanced Powder Technology, 29(12), 3199, 2018 |
| 8 |
Effect of polyethyleneimine-fatty acid complex type dispersant structure on the overall processing chain of Si3N4 ceramics using multicomponent non-aqueous slurries
Iijima M, Okamura N, Tatami J
Advanced Powder Technology, 29(12), 3440, 2018 |
| 9 |
SiO2 nanoparticles surface modified with polyethyleneimine-oleic acid complex as stabilizers of Ni fine particles in dense nonaqueous suspensions
Morita S, Iijima M, Tatami J
Advanced Powder Technology, 28(1), 30, 2017 |
| 10 |
Spark plasma sintering of silicon nitride using nanocomposite particles
Jeong K, Tatami J, Lijima M, Nishimura T
Advanced Powder Technology, 28(1), 37, 2017 |
