1 |
Novel sintering indexes to evaluate and correlate the crystal characteristics and compressive strength in magnetite pellets Wang YZ, Schenk J, Zhang JL, Liu ZJ, Wang J, Niu LL, Cheng Q Powder Technology, 362, 517, 2020 |
2 |
Analytical and numerical determination of the heat transfer coefficient between scrap and hot metal based on small-scale experiments Penz FM, Tavares RP, Weiss C, Schenk J, Ammer R, Pastucha K, Klosch G International Journal of Heat and Mass Transfer, 138, 640, 2019 |
3 |
Gasification Reactivity and Structure Evolution of Metallurgical Coke under H2O/CO2 Atmosphere Xu RS, Dai BW, Wang W, Schenk J, Bhattacharyya A, Xue ZL Energy & Fuels, 32(2), 1188, 2018 |
4 |
Influence of Iron Minerals on the Volume, Strength, and CO2 Gasification of Ferro-coke Xu RS, Zheng H, Wang W, Schenk J, Xue ZL Energy & Fuels, 32(12), 12118, 2018 |
5 |
Comparison of GC-VUV, GC-FID, and comprehensive two-dimensional GC-MS for the characterization of weathered and unweathered diesel fuels Bai L, Smuts J, Schenk J, Cochran J, Schug KA Fuel, 214, 521, 2018 |
6 |
Effect of iron ore type on the thermal behaviour and kinetics of coal-iron ore briquettes during coking Xu RS, Dai BW, Wang W, Schenk J, Xue ZL Fuel Processing Technology, 173, 11, 2018 |
7 |
Foam formation in biogas plants caused by anaerobic digestion of sugar beet Moeller L, Lehnig M, Schenk J, Zehnsdorf A Bioresource Technology, 178, 270, 2015 |
8 |
Behavior of Chromium, Nickel, Lead, Zinc, Cadmium, and Mercury in the Blast Furnace-A Critical Review of Literature Data and Plant Investigations Trinkel V, Mallow O, Thaler C, Schenk J, Rechberger H, Fellner J Industrial & Engineering Chemistry Research, 54(47), 11759, 2015 |
9 |
Assessing the quality of metallurgical coke by Raman spectroscopy Rantitsch G, Bhattacharyya A, Schenk J, Lunsdorf NK International Journal of Coal Geology, 130, 1, 2014 |
10 |
Combination of Rigorous and Statistical Modeling for Process Development of Plant-Based Extractions Based on Mass Balances and Biological Aspects Kassing M, Jenelten U, Schenk J, Hansch R, Strube J Chemical Engineering & Technology, 35(1), 109, 2012 |