| 1 |
Breaking of Water-in-Crude Oil Emulsions. 8. Demulsifier Performance at Optimum Formulation Is Significantly Improved by a Small Aromatic Content of the Oil
Alvarado JG, Delgado-Linares JG, Forgiarini AM, Salager JL
Energy & Fuels, 33(3), 1928, 2019 |
| 2 |
Breaking of Water-In-Crude Oil Emulsions. Part 9. New Interfacial Rheology Characteristics Measured Using a Spinning Drop Rheometer at Optimum Formulation
Marquez R, Forgiarini AM, Langevin D, Salager JL
Energy & Fuels, 33(9), 8151, 2019 |
| 3 |
Interfacial rheology of low interfacial tension systems using a new oscillating spinning drop method
Zamora JM, Marquez R, Forgiarini AM, Langevin D, Salager JL
Journal of Colloid and Interface Science, 519, 27, 2018 |
| 4 |
Instability of Emulsions Made with Surfactant-Oil-Water Systems at Optimum Formulation with Ultralow Interfacial Tension
Marquez R, Forgiarini AM, Langevin D, Salager JL
Langmuir, 34(31), 9252, 2018 |
| 5 |
Breaking of Water-in-Crude Oil Emulsions. 6. Estimating the Demulsifier Performance at Optimum Formulation from Both the Required Dose and the Attained Instability
Delgado-Linares JG, Pereira JC, Rondon M, Bullon J, Salager JL
Energy & Fuels, 30(7), 5483, 2016 |
| 6 |
Breaking of Water-in-Crude Oil Emulsions. 7. Demulsifier Performance at Optimum Formulation for Various Extended Surfactant Structures
Delgado-Linares JG, Alvarado JG, Vejar F, Bullon J, Forgiarini AM, Salager JL
Energy & Fuels, 30(9), 7065, 2016 |
| 7 |
Cone-Plate Rheometer as Reactor and Viscosity Probe for the Detection of Transitional Phase Inversion of Brij30-Isopropyl Myristate-Water Model Emulsion
Pierlot C, Ontiveros JF, Catte M, Salager JL, Aubry JM
Industrial & Engineering Chemistry Research, 55(14), 3990, 2016 |
| 8 |
Structure interfacial properties relationship and quantification of the amphiphilicity of well-defined ionic and non-ionic surfactants using the PIT-slope method
Ontiveros JF, Pierlot C, Catte M, Molinier V, Salager JL, Aubry JM
Journal of Colloid and Interface Science, 448, 222, 2015 |
| 9 |
Breaking of Water-in-Crude Oil Emulsions. 5. Effect of Acid-Alkaline Additives on the Performance of Chemical Demulsifiers
Silva I, Borges B, Blanco R, Rondon M, Salager JL, Pereira JC
Energy & Fuels, 28(6), 3587, 2014 |
| 10 |
Relationship between Phase Behavior and Emulsion Inversion for a Well-Defined Surfactant (C10E4)/n-Octane/Water Ternary System at Different Temperatures and Water/Oil Ratios
Pizzino A, Molinier V, Catte M, Ontiveros JF, Salager JL, Aubry JM
Industrial & Engineering Chemistry Research, 52(12), 4527, 2013 |
