| 1 |
Parametric study of the Crossing elongation effect on the mixing performances using short Two-Layer Crossing Channels Micromixer (TLCCM) geometry
Amar K, Embarek D, Sofiane K
Chemical Engineering Research & Design, 158, 33, 2020 |
| 2 |
CFD study about the effect of using multiple inlets on the efficiency of a micromixer. Assessment of the optimal inlet configuration working as a microreactor
Ortega-Casanova J, Lai CH
Chemical Engineering and Processing, 125, 163, 2018 |
| 3 |
Stationary and time-dependent numerical approximation of the lid-driven cavity problem for power-law fluid flows at high Reynolds numbers using a stabilized finite element formulation of the VMS type
Aguirre A, Castillo E, Cruchaga M, Codina R, Baiges J
Journal of Non-Newtonian Fluid Mechanics, 257, 22, 2018 |
| 4 |
Application of CFD on the optimization by response surface methodology of a micromixing unit and its use as a chemical microreactor
Ortega-Casanova J
Chemical Engineering and Processing, 117, 18, 2017 |
| 5 |
On the onset of vortex shedding from 2D confined rectangular cylinders having different aspect ratios: Application to promote mixing fluids
Ortega-Casanova J
Chemical Engineering and Processing, 120, 81, 2017 |
| 6 |
Generalized correlations for mass transfer and pressure drop in fiber-based catalyst supports
Reichelt E, Jahn M
Chemical Engineering Journal, 325, 655, 2017 |
| 7 |
Influence of artificial disturbances on characteristics of the heated liquid film
Chinnov EA, Abdurakipov SS
International Journal of Heat and Mass Transfer, 113, 129, 2017 |
| 8 |
Effect of turbulent inflows on airfoil performance for a Horizontal Axis Wind Turbine at low Reynolds numbers (part I: Static pressure measurement)
Li QA, Kamada Y, Maeda T, Murata J, Nishida Y
Energy, 111, 701, 2016 |
| 9 |
Wave - Thermocapillary effects in heated liquid films at high Reynolds numbers
Chinnov EA
International Journal of Heat and Mass Transfer, 71, 106, 2014 |
| 10 |
The sedimentation velocity of a particle in a wide range of Reynolds numbers in the application to the analysis of the separation curve
Dueck J
Advanced Powder Technology, 24(1), 150, 2013 |
