| 1 |
Assessing the Potential of Biochars Prepared by Steam-Assisted Slow Pyrolysis for CO2 Adsorption and Separation
Gargiulo V, Gomis-Berenguer A, Giudicianni P, Ania CO, Ragucci R, Alfe M
Energy & Fuels, 32(10), 10218, 2018 |
| 2 |
Numerical Investigation of Moderate or Intense Low-Oxygen Dilution Combustion in a Cyclonic Burner Using a Flamelet-Generated Manifold Approach
Sorrentino G, Cenello G, de Joannon M, Sabia P, Ragucci R, van Oijen J, Cavahere A, de Goey LPH
Energy & Fuels, 32(10), 10242, 2018 |
| 3 |
Torrefaction of Woody Waste for Use as Biofuel
Grottola CM, Giudicianni P, Michel JB, Ragucci R
Energy & Fuels, 32(10), 10266, 2018 |
| 4 |
Removal of Very Small Submicrometric Particles by Water Nucleation: Effects of Chemical-Physical Properties of Particles
de Joannon M, Alfe M, Cozzolino G, Gargiulo V, Sabia P, Ragucci R
Energy & Fuels, 32(10), 10285, 2018 |
| 5 |
Effect of alkali metal ions presence on the products of xylan steam assisted slow pyrolysis
Giudicianni P, Gargiulo V, Grottola CM, Alfe M, Ragucci R
Fuel, 216, 36, 2018 |
| 6 |
Modeling the impact of the presence of KCl on the slow pyrolysis of cellulose
Ferreiro AI, Rabacal M, Costa M, Giudicianni P, Grottola CM, Ragucci R
Fuel, 215, 57, 2018 |
| 7 |
Influence of preheating and thermal power on cyclonic burner characteristics under mild combustion
Sorrentino G, Sabia P, de Joannon M, Bozza P, Ragucci R
Fuel, 233, 207, 2018 |
| 8 |
Impact of external operating parameters on the performance of a cyclonic burner with high level of internal recirculation under MILD combustion conditions
Sorrentino G, Sabia P, Bozza P, Ragucci R, de Joannon M
Energy, 137, 1167, 2017 |
| 9 |
Unresolved Issues on the Kinetic Modeling of Pyrolysis of Woody and Nonwoody Biomass Fuels
Ferreiro AI, Giudicianni P, Grottola CM, Rabacal M, Costa M, Ragucci R
Energy & Fuels, 31(4), 4035, 2017 |
| 10 |
Effects of mixture composition, dilution level and pressure on auto-ignition delay times of propane mixtures
Sabia P, de Joannon M, Sorrentino G, Giudicianni P, Ragucci R
Chemical Engineering Journal, 277, 324, 2015 |
