| 1 |
Study on the influence of solids volume fraction on filter cake structures using micro tomography
Lower E, Pham TH, Leissner T, Peuker UA
Powder Technology, 363, 286, 2020 |
| 2 |
Secondary particle properties for the ion beam sputtering of TiO2 in a reactive oxygen atmosphere
Bundesmann C, Amelal T
Applied Surface Science, 485, 391, 2019 |
| 3 |
CFD-DEM study on the mixing characteristics of binary particle systems in a fluidized bed of refuse-derived fuel
Wang LJ, Wei GC, Duan SP, Hou QF
Particulate Science and Technology, 37(1), 51, 2019 |
| 4 |
CFD and experimental studies on a circulating fluidised bed reactor for biomass gasification
Yu X, Blanco PH, Makkawi Y, Bridgwater AV
Chemical Engineering and Processing, 130, 284, 2018 |
| 5 |
Influence of process conditions on the product Cheat tar properties in a continuous fluidized bed spray granulation process
Diez E, Meyer K, Buck A, Tsotsas E, Heinrich S
Chemical Engineering Research & Design, 139, 104, 2018 |
| 6 |
Experiments and simulation of torque in Anton Paar powder cell
Salehi H, Sofia D, Schutz D, Barletta D, Poletto M
Particulate Science and Technology, 36(4), 501, 2018 |
| 7 |
Ash formation and deposition in coal and biomass fired combustion systems: Progress and challenges in the field of ash particle sticking and rebound behavior
Kleinhans U, Wieland C, Frandsen FJ, Spliethoff H
Progress in Energy and Combustion Science, 68, 65, 2018 |
| 8 |
Review of cluster characteristics in circulating fluidized bed (CFB) risers
Cahyadi A, Anantharaman A, Yang SL, Karri SBR, Findlay JG, Cocco RA, Chew JW
Chemical Engineering Science, 158, 70, 2017 |
| 9 |
A parametric evaluation of powder flowability using a Freeman rheometer through statistical and sensitivity analysis: A discrete element method (DEM) study
Wilkinson SK, Turnbull SA, Yan Z, Stitt EH, Marigo M
Computers & Chemical Engineering, 97, 161, 2017 |
| 10 |
A review on particulate slurry erosive wear of industrial materials: In context with pipeline transportation of mineral-slurry
Sinha SL, Dewangan SK, Sharma A
Particulate Science and Technology, 35(1), 103, 2017 |
