| 1 |
Impact of structure and morphology of nanostructured ceria coating on AISI 304 oxidation kinetics
Aadhavan R, Babu KS
Applied Surface Science, 411, 219, 2017 |
| 2 |
Influence of Ni deposition and subsequent N+ ion implantation at different substrate temperatures on nano-structure and corrosion behaviour of type 316 and 304 stainless steels
Savaloni H, Habibi M
Applied Surface Science, 258(1), 103, 2011 |
| 3 |
Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments
Wang L, Northwood DO, Nie X, Housden J, Spain E, Leyland A, Matthews A
Journal of Power Sources, 195(12), 3814, 2010 |
| 4 |
Enhanced wear resistance of the Cr-based thin film coating on micro drill by doping with W-C-N
Chu CW, Jang JSC, Chen HW, Chuang TL
Thin Solid Films, 517(17), 5197, 2009 |
| 5 |
Loss of adhesion strength of PVD Cu films on carbon substrates after heat treatment and correlated effects on the thermal interface properties
Neubauer E, Chotikaprakhan S, Dietzel D, Bein BK, Pelzl J, Eisenmenger-Sittner C, Schrank C, Korb G
Applied Surface Science, 252(15), 5432, 2006 |
| 6 |
Preliminary studies to develop environmentally compatible hydraulic components
Lee SY, Kim SD, Kim GS, Hong YS
Materials Science Forum, 486-487, 444, 2005 |
| 7 |
Taguchi methods to optimize TiN coating surface roughness
Yim SL, Yu KM, Kwok D, Lee TC
Materials Science Forum, 471-472, 891, 2004 |
| 8 |
A nanoindentation based determination of internal stress alterations in PVD films and their cemented carbides substrates induced by recoating procedures and their effect on the cutting performance
Bouzakis KD, Skordaris G, Hadjiyiannis S, Asimakopoulos A, Mirisidis J, Michailidis N, Erkens G, Cremer R, Klocke F, Kleinjans M
Thin Solid Films, 447, 264, 2004 |
| 9 |
On the coating of polymers - basic investigations
Lugscheider E, Bobzin K, Maes M, Kramer A
Thin Solid Films, 459(1-2), 313, 2004 |
| 10 |
Powder metallurgy in tooling - Theoretical background, material production and processing
Jurci P
Materials Science Forum, 426-4, 4191, 2003 |
