| 1 |
Constant current electrophoretic infiltration deposition of fiber-reinforced ceramic composites
Bao YH, Nicholson PS
Journal of the American Ceramic Society, 90(4), 1063, 2007 |
| 2 |
AlPO4 coating on alumina/mullite fibers as a weak interface in fiber-reinforced oxide composites
Bao YH, Nicholson PS
Journal of the American Ceramic Society, 89(2), 465, 2006 |
| 3 |
Bridging-stress evaluation in a Ni/Al2O3 system via the digital image-correlation technique
Mekky W, Nicholson PS
Journal of the American Ceramic Society, 89(3), 1095, 2006 |
| 4 |
Electrophoretic deposition - mechanisms, myths and materials
Fukada Y, Nagarajan N, Mekky W, Bao Y, Kim HS, Nicholson PS
Journal of Materials Science, 39(3), 787, 2004 |
| 5 |
Conductive, polypyrrole coating on mulhite/alumina fibers for electrophoretic deposition of oxide matrices
Bao YH, Nicholson PS
Journal of the American Ceramic Society, 87(9), 1767, 2004 |
| 6 |
Nickel-alumina functionally graded materials by electrophoretic deposition
Nagarajan N, Nicholson PS
Journal of the American Ceramic Society, 87(11), 2053, 2004 |
| 7 |
Failure prediction maps for a model Al2O3 vertical bar c-ZrO2/Al2O3 vertical bar Al2O3 brittle polycrystalline trilayer composite
Barnett-Ritcey DD, Nicholson PS
Journal of the American Ceramic Society, 86(1), 121, 2003 |
| 8 |
Use of mixed-rare-earth oxide in the preparation of reaction-bonded mullite at <= 1300 degrees C
Kim HS, Nicholson PS
Journal of the American Ceramic Society, 85(7), 1730, 2002 |
| 9 |
Relative colloidal stability in ethanol of powders with Si-O surface species
Fukada Y, Nicholson PS
Journal of the American Ceramic Society, 85(12), 2945, 2002 |
| 10 |
Design and fracture of layered Al2O3/TZ3Y composites produced by electrophoretic deposition
Hatton B, Nicholson PS
Journal of the American Ceramic Society, 84(3), 571, 2001 |
