| 1 |
Optimization of spinning parameters on the fabrication of NH2-MIL-53(Al)/cellulose acetate (CA) hollow fiber mixed matrix membrane for CO2 separation
Mubashir M, Fong YY, Leng CT, Keong LK
Separation and Purification Technology, 215, 32, 2019 |
| 2 |
Characteristic of a multi-pass membrane separator for hydrogen separation through self-supported Pd-Ag membranes
Sharma R, Kumar A, Upadhyay RK
International Journal of Hydrogen Energy, 43(10), 5019, 2018 |
| 3 |
Fabrication of composite membranes for pervaporation of tetrahydrofuran-water: Optimization of intrinsic property by response surface methodology and studies on vulcanization mechanism by density functional theory
Mahapatra M, Karmakar M, Dutta A, Singha NR
Korean Journal of Chemical Engineering, 35(9), 1889, 2018 |
| 4 |
Optimization of operating conditions in ultrafiltration process for produced water treatment via the full factorial design methodology
Shahabadi SMS, Reyhani A
Separation and Purification Technology, 132, 50, 2014 |
| 5 |
Fluoride and Arsenic Removal by Nanofiltration Technology from Groundwater in Rural Areas of China: Performances with Membrane Optimization
Xi BD, Wang XW, Liu WJ, Xia XF, Li DS, He LS, Wang HM, Sun WJ, Yang TX, Tao W
Separation Science and Technology, 49(17), 2642, 2014 |
| 6 |
A Study of the Effect of Operating Conditions on Reverse Osmosis Membrane Performance with and without Air Sparging Technique
Alsalhy QF, Albyati TM, Zablouk MA
Chemical Engineering Communications, 200(1), 1, 2013 |
| 7 |
Optimization and kinetics of phosphoric acid doping of poly(1-vinylimidazole)-graft-poly(ethylene-co-tetrafluorethylene) proton conducting membrane precursors
Nasef MM, Saidi H, Ahmad A, Ali AA
Journal of Membrane Science, 446, 422, 2013 |
| 8 |
Optimisation of the connection of membrane CCS installation with a supercritical coal-fired power plant
Kotowicz J, Bartela L
Energy, 38(1), 118, 2012 |
| 9 |
Ammonium as a sustainable proton shuttle in bioelectrochemical systems
Cord-Ruwisch R, Law Y, Cheng KY
Bioresource Technology, 102(20), 9691, 2011 |
| 10 |
Selection of design parameters and optimization of operating parameters of soybean oil-based bulk liquid membrane for Cu(II) removal and recovery from aqueous solutions
Chang SH, Teng TT, Ismail N, Alkarkhi AFM
Journal of Hazardous Materials, 190(1-3), 197, 2011 |
