| 1 |
SMART-Reactors: Tailoring Gas Holdup Distribution by Additively Manufactured Lattice Structures
Spille C, Lyberis A, Maiwald MI, Herzog D, Hoffmann M, Emmelmann C, Schluter M
Chemical Engineering & Technology, 43(10), 2053, 2020 |
| 2 |
Influence of heat-exchanging tubes diameter on the gas holdup and bubble dynamics in a bubble column
Jasim AA, Sultan AJ, Al-Dahhan MH
Fuel, 236, 1191, 2019 |
| 3 |
Impact of heat exchanging internals configurations on the gas holdup and bubble properties in a bubble column
Jasim AA, Sultan AJ, Al-Dahhan MH
International Journal of Multiphase Flow, 112, 63, 2019 |
| 4 |
Local gas holdup and bubble dynamics investigation during microalgae culturing in a split airlift photobioreactor
Ojha A, Al-Dahhan M
Chemical Engineering Science, 175, 185, 2018 |
| 5 |
Influence of Structured Packings on Local Phase Distribution in a Semi-Batch Bubble Column Operated in the Homogeneous Regime
Lesniak AK, Grunewald M
Journal of Chemical Engineering of Japan, 51(4), 366, 2018 |
| 6 |
Impacts of dense heat exchanging internals on gas holdup cross-sectional distributions and profiles of bubble column using gamma ray Computed Tomography (CT) for FT synthesis
Al Mesfer MK, Sultan AJ, Al-Dahhan MH
Chemical Engineering Journal, 300, 317, 2016 |
| 7 |
Local gas phase flow characteristics of a gas-liquid-solid three-phase reversed flow jet loop reactor
Wen JP, Zhou HA, Chen YL
Chinese Journal of Chemical Engineering, 10(1), 119, 2002 |
| 8 |
Scale-up effects on the time-averaged and dynamic behavior in bubble column reactors
Chen W, Hasegawa T, Tsutsumi A, Otawara K
Chemical Engineering Science, 56(21-22), 6149, 2001 |
| 9 |
Phase holdup and gas-to-liquid mass transfer coefficient in magneto stabilized G-L-S airlift fermenter
Al-Qodah Z, Al-Hassan M
Chemical Engineering Journal, 79(1), 41, 2000 |
