| 1 |
Gas suction and mass transfer in gas-liquid up-flow ejector loop reactors. Effect of nozzle and ejector geometry
Opletala M, Novotny P, Linek V, Moucha T, Kordac M
Chemical Engineering Journal, 353, 436, 2018 |
| 2 |
The Effect of Column Diameter and Packing Height on the Pressure Drop and on the HETP of Structured Packings
Valenz L, Haidl J, Linek V
Industrial & Engineering Chemistry Research, 52(17), 5967, 2013 |
| 3 |
Power and mass transfer correlations for the design of multi-impeller gas-liquid contactors for non-coalescent electrolyte solutions
Linek V, Moucha T, Rejl FJ, Kordac M, Hovorka F, Opletal M, Haidl J
Chemical Engineering Journal, 209, 263, 2012 |
| 4 |
Measurement of mass transfer characteristics of gas/liquid reactors by sulphite system using on-line monitoring UV absorption
Kordac M, Opletal M, Linek V
Chemical Engineering Journal, 167(1), 314, 2011 |
| 5 |
Effect of Gas- and Liquid-Phase Axial Mixing on the Rate of Mass Transfer in a Pilot-Scale Distillation Column Packed with Mellapak 250Y
Valenz L, Rejl FJ, Linek V
Industrial & Engineering Chemistry Research, 50(4), 2262, 2011 |
| 6 |
Absorption Mass-Transfer Characteristics of Mellapak Packings Series
Valenz L, Rejl FJ, Sima J, Linek V
Industrial & Engineering Chemistry Research, 50(21), 12134, 2011 |
| 7 |
"Profile Method" for the Measurement of k(L)a and k(V)a in Distillation Columns. Validation of Rate-Based Distillation Models Using Concentration Profiles Measured along the Column
Rejl FJ, Valenz L, Linek V
Industrial & Engineering Chemistry Research, 49(9), 4383, 2010 |
| 8 |
Gas and Liquid Axial Mixing in the Column Packed with Mellapak 250Y, Pall Rings 25, and Intalox Saddles 25 under Flow Conditions Prevailing in Distillation Columns
Valenz L, Rejl FJ, Linek V
Industrial & Engineering Chemistry Research, 49(20), 10016, 2010 |
| 9 |
Laboratory differential simulation design method of pressure absorbers for carbonization of phenolate solution by carbon dioxide in coal-tar processing
Linek V, Sinkule J, Moucha T, Rejl JF
Chemical Engineering and Processing, 48(1), 569, 2009 |
| 10 |
Methods standardization in the measurement of mass-transfer characteristics in packed absorption columns
Rejl JF, Linek V, Moucha T, Valenz L
Chemical Engineering Research & Design, 87(5A), 695, 2009 |
