| 1 |
Monitoring temperature evolution and drying of coating on a single fluidized particle by infrared thermography
Lindner JA, Muller MG, Briesen H, Foerst P
Powder Technology, 382, 331, 2021 |
| 2 |
A novel method for assessing the coating uniformity of hot-melt coated particles using micro-computed tomography
Woerthmann BM, Lindner JA, Kovacevic T, Pergam P, Schmid F, Briesen H
Powder Technology, 378, 51, 2021 |
| 3 |
On the properties and application of beeswax, carnauba wax and palm fat mixtures for hot melt coating in fluidized beds
Muller MG, Lindner JA, Briesen H, Sommer K, Foerst P
Advanced Powder Technology, 29(3), 781, 2018 |
| 4 |
On the influence of the wall friction coefficient on void fraction gradients in horizontal pneumatic plug conveying measured by electrical capacitance tomography
Nied C, Lindner JA, Sommer K
Powder Technology, 321, 310, 2017 |
| 5 |
Design and application of a longitudinal field Aubert permanent magnet composed of identically-shaped blocks for large-scale Magnetic Separation
Menzel K, Lindner JA, Soltner H, Nirschl H
Separation and Purification Technology, 134, 220, 2014 |
| 6 |
Dipolar openable Halbach magnet design for High-Gradient Magnetic Filtration
Menzel K, Windt CW, Lindner JA, Michel A, Nirschl H
Separation and Purification Technology, 105, 114, 2013 |
