| 1 |
Status and Perspectives of Biomass Use for Industrial Process Heat for Industrialized Countries
Lenz V, Szarka N, Jordan M, Thran D
Chemical Engineering & Technology, 43(8), 1469, 2020 |
| 2 |
Influence of Screening and Drying on Low-Quality Wood Chips for Application in Small-Scale Gasification Plants
Pollex A, Lesche S, Kuptz D, Zeng TM, Kuffer G, Muhlenberg J, Hartmann H, Lenz V
Chemical Engineering & Technology, 43(8), 1493, 2020 |
| 3 |
Blended biomass pellets as fuel for small scale combustion appliances: Effect of blending on slag formation in the bottom ash and pre-evaluation options
Zeng T, Pollex A, Weller N, Lenz V, Nelles M
Fuel, 212, 108, 2018 |
| 4 |
Content of potassium and other aerosol forming elements in commercially available wood pellet batches
Pollex A, Zeng T, Khalsa J, Erler U, Schmersahl R, Schon C, Kuptz D, Lenz V, Nelles M
Fuel, 232, 384, 2018 |
| 5 |
SmartBiomassHeat - Heat from Solid Biofuels as an Integral Part of a Future Energy System Based on Renewables
Lenz V, Ortwein A
Chemical Engineering & Technology, 40(2), 313, 2017 |
| 6 |
CO, NOX, PCDD/F, and Total Particulate Matter Emissions from Two Small Scale Combustion Appliances Using Agricultural Biomass Type Test Fuels
Zeng T, von Sonntag J, Weller N, Pilz A, Lenz V, Nelles M
Energy & Fuels, 31(7), 7540, 2017 |
| 7 |
Blended biomass pellets as fuel for small scale combustion appliances: Influence on gaseous and total particulate matter emissions and applicability of fuel indices
Zeng T., Weller N., Pollex A., Lenz V.
Fuel, 184, 689, 2016 |
| 8 |
Hay pellets - The influence of particle size reduction on their physical-mechanical quality and energy demand during production
Kirsten C, Lenz V, Schroder HW, Repke JU
Fuel Processing Technology, 148, 163, 2016 |
| 9 |
Bioenergy potential and consumption in Pakistan
Butt S, Hartmann I, Lenz V
Biomass & Bioenergy, 58, 379, 2013 |
| 10 |
Catalyst Tests on a Pilot Plant for Small Biomass Combustion Systems
Hartmann I, Lenz V, Schenker M, Thiel C, Roland U, Einicke WD, Bindig R
Chemie Ingenieur Technik, 83(3), 371, 2011 |
