| 1 |
Thermoacoustic instability analysis of a laminar lean premixed flame under autoignitive conditions
Yu ZM, Ai YH, Wang Y, Luo CZ
Combustion and Flame, 225, 513, 2021 |
| 2 |
Role of particle diameter in laminar combustion regimes for hybrid mixtures of coal dust and methane gas
Cloney CT, Ripley RC, Pegg MJ, Amyotte PR
Powder Technology, 362, 399, 2020 |
| 3 |
Critical conditions for non-symmetric flame propagation in narrow channels: Influence of the flow rate, the thermal expansion, the Lewis number and heat-losses
Dejoan A, Jimenez C, Kurdyumov VN
Combustion and Flame, 209, 430, 2019 |
| 4 |
Flame behavior during propagation in small isothermal tubes characterized by different degrees of the end opening
Gutkowski AN, Lecki M, Jasinski P, Jedrowiak B
Combustion Science and Technology, 191(4), 711, 2019 |
| 5 |
Role of particle diameter in the lower flammability limits of hybrid mixtures containing coal dust and methane gas
Cloney CT, Ripley RC, Pegg MJ, Khan FI, Amyotte PR
Journal of Loss Prevention in The Process Industries, 61, 206, 2019 |
| 6 |
Laminar burning velocity and structure of coal dust flames using a unity Lewis number CFD model
Cloney CT, Ripley RC, Pegg MJ, Amyotte PR
Combustion and Flame, 190, 87, 2018 |
| 7 |
Laminar combustion regimes for hybrid mixtures of coal dust with methane gas below the gas lower flammability limit
Cloney CT, Ripley RC, Pegg MJ, Amyotte PR
Combustion and Flame, 198, 14, 2018 |
| 8 |
A comprehensive review on laminar spherically premixed flame propagation of syngas
Xie YL, Wang XJ, Bi HQ, Yuan YP, Wang JH, Huang ZH, Lei B
Fuel Processing Technology, 181, 97, 2018 |
| 9 |
Lower flammability limits of hybrid mixtures containing 10 micron coal dust particles and methane gas
Cloney CT, Ripley RC, Pegg MJ, Khan F, Amyotte PR
Process Safety and Environmental Protection, 120, 215, 2018 |
| 10 |
Investigations on the Formation of Planar Flames in Mesoscale Divergent Channels and Prediction of Burning Velocity at High Temperatures
Akram M, Minaev S, Kumar S
Combustion Science and Technology, 185(4), 645, 2013 |
