검색결과 : 14건
No. | Article |
---|---|
1 |
Rapid carbon nanotubes suspension in organic solvents using organosilicon polymers Dalcanale F, Grossenbacher J, Blugan G, Gullo MR, Brugger J, Tevaearai H, Graule T, Kuebler J Journal of Colloid and Interface Science, 470, 123, 2016 |
2 |
High temperature mechanical properties of zirconia tapes used for electrolyte supported solid oxide fuel cells Fleischhauer F, Bermejo R, Danzer R, Mai A, Graule T, Kuebler J Journal of Power Sources, 273, 237, 2015 |
3 |
Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells Fleischhauer F, Terner M, Bermejo R, Danzer R, Mai A, Graule T, Kuebler J Journal of Power Sources, 275, 217, 2015 |
4 |
Strength of an electrolyte supported solid oxide fuel cell Fleischhauer F, Bermejo R, Danzer R, Mai A, Graule T, Kuebler J Journal of Power Sources, 297, 158, 2015 |
5 |
Effectiveness of wick-debinding inside powder bed for ceramic laminates made by tape casting Gorjan L, Blugan G, Graule T, Kuebler J Powder Technology, 273, 197, 2015 |
6 |
Failure analysis of electrolyte-supported solid oxide fuel cells Fleischhauer F, Tiefenauer A, Graule T, Danzer R, Mai A, Kuebler J Journal of Power Sources, 258, 382, 2014 |
7 |
Mechanical properties of 10 mol% Sc2O3-1 mol% CeO2-89 mol% ZrO2 ceramics Orlovskaya N, Lukich S, Subhash G, Graule T, Kuebler J Journal of Power Sources, 195(9), 2774, 2010 |
8 |
Mechanical behavior and electrical conductivity of La1-xCaxCoO3 (x=0, 0.2, 0.4, 0.55) perovskites Pathak S, Kuebler J, Payzant A, Orlovskaya N Journal of Power Sources, 195(11), 3612, 2010 |
9 |
Mechanical properties of three-dimensional interconnected alumina/steel metal matrix composites Wittig D, Aneziris CG, Graule T, Kuebler J Journal of Materials Science, 44(2), 572, 2009 |
10 |
Molten salt-assisted combustion synthesis and characterization of MoSi2 and MoSi2-Si3N4 composite powders Manukyan KV, Aydinyan SV, Kirakosyan KG, Kharatyan SL, Blugan G, Muller U, Kuebler J Chemical Engineering Journal, 143(1-3), 331, 2008 |