| 1 |
Guest Editorial Emerging Electric Machines and Drives for Smart Energy Conversion
Liu C, Chau KT, Kirtley JL, Chan CC, Rajashekara K, Cheng M, Jahns TM, Zhang Z, Kwon BI, Shek J, Li W, Garrigos A, Lee CHT, Komurcugil H, Banerjee A, Ehsani M, Gao S, Chiba A, Tessarolo A, Cramer AM, Amin MM
IEEE Transactions on Energy Conversion, 33(4), 1931, 2018 |
| 2 |
Investigation of Key Factors Influencing the Response of Permanent Magnet Synchronous Machines to Three-Phase Symmetrical Short-Circuit Faults
Choi G, Jahns TM
IEEE Transactions on Energy Conversion, 31(4), 1488, 2016 |
| 3 |
Comparison of Interior and Surface PM Machines Equipped With Fractional-Slot Concentrated Windings for Hybrid Traction Applications
Reddy PB, El-Refaie AM, Huh KK, Tangudu JK, Jahns TM
IEEE Transactions on Energy Conversion, 27(3), 593, 2012 |
| 4 |
Torque Ripple Reduction in Interior Permanent Magnet Synchronous Machines Using Stators With Odd Number of Slots Per Pole Pair
Han SH, Jahns TM, Soong WL, Guven MK, Illindala MS
IEEE Transactions on Energy Conversion, 25(1), 118, 2010 |
| 5 |
Reducing Harmonic Eddy-Current Losses in the Stator Teeth of Interior Permanent Magnet Synchronous Machines During Flux Weakening
Han SH, Soong WL, Jahns TM, Guven MK, Illindala MS
IEEE Transactions on Energy Conversion, 25(2), 441, 2010 |
| 6 |
Impact of winding layer number and magnet type on synchronous surface PM machines designed for wide constant-power speed range operation
El-Refaie AM, Jahns TM
IEEE Transactions on Energy Conversion, 23(1), 53, 2008 |
| 7 |
Analysis of surface permanent magnet machines with fractional-slot concentrated windings
El-Refaie AM, Jahns TM, Novotny DW
IEEE Transactions on Energy Conversion, 21(1), 34, 2006 |
| 8 |
Scalability of surface PM machines with concentrated windings designed to achieve wide speed ranges of constant-power operation
El-Refaie AM, Jahns TM
IEEE Transactions on Energy Conversion, 21(2), 362, 2006 |
| 9 |
Application of bi-state magnetic material to an automotive IPM starter/alternator machine
El-Refaie AM, Jahns TM
IEEE Transactions on Energy Conversion, 20(1), 71, 2005 |
| 10 |
Thermal analysis of multibarrier interior PM synchronous machine using lumped parameter model
El-Refaie AM, Harris NC, Jahns TM, Rahman KM
IEEE Transactions on Energy Conversion, 19(2), 303, 2004 |
