| 1 |
Improved mixture quality by advanced dual-nozzle, included-angle split injection in HSDI engine: Exergetic exploration
Taghavifar H, Nemati A, Salvador FJ, De la Morena J
Energy, 167, 211, 2019 |
| 2 |
Computational assessment of temperature variations through calibrated orifices subjected to high pressure drops: Application to diesel injection nozzles
Salvador FJ, Carreres M, De la Morena J, Martinez-Miracle E
Energy Conversion and Management, 171, 438, 2018 |
| 3 |
Experimental investigation of the effect of orifices inclination angle in multihole diesel injector nozzles. Part 1-Hydraulic performance
Salvador FJ, Lopez JJ, De la Morena J, Crialesi-Esposito M
Fuel, 213, 207, 2018 |
| 4 |
Experimental investigation of the effect of orifices inclination angle in multihole diesel injector nozzles. Part 2-Spray characteristics
Payri R, Salvador FJ, De la Morena J, Pagano V
Fuel, 213, 215, 2018 |
| 5 |
Assessment of compressibility effects on internal nozzle flow in diesel injectors at very high injection pressures
Salvador FJ, De la Morena J, Martinez-Lopez J, Jaramillo D
Energy Conversion and Management, 132, 221, 2017 |
| 6 |
Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis
Payri R, Salvador FJ, Carreres M, De la Morena J
Energy Conversion and Management, 114, 376, 2016 |
| 7 |
Study of new prototype pintle injectors for diesel engine application
Payri R, Gimeno J, De la Morena J, Battiston PA, Wadhwa A, Straub R
Energy Conversion and Management, 122, 419, 2016 |
| 8 |
NUMERICAL ANALYSIS OF THE INFLUENCE OF DIESEL NOZZLE DESIGN ON INTERNAL FLOW CHARACTERISTICS FOR 2-VALVE DIESEL ENGINE APPLICATION
De la Morena J, Neroorkar K, Plazas AH, Peterson RC, Schmidt DP
Atomization and Sprays, 23(2), 97, 2013 |
| 9 |
Using one-dimensional modeling to analyze the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Results of the simulations and discussion
Salvador FJ, Gimeno J, De la Morena J, Carreres M
Energy Conversion and Management, 54(1), 122, 2012 |
| 10 |
Influence of injector technology on injection and combustion development - Part 1: Hydraulic characterization
Payri R, Salvador FJ, Gimeno J, De la Morena J
Applied Energy, 88(4), 1068, 2011 |
