화학공학소재연구정보센터
검색결과 : 10건
No. Article
1 A high-performance composite positive electrode based on graphene and Li (Ni1/3Co1/3Mn1/3)O-2
Guler A, Gungor H, Ozcan S, Coban A, Guler MO, Akbulut H
International Journal of Energy Research, 42(14), 4499, 2018
2 Mass transport coefficients of different nanofiltration membranes for biologically pre-treated textile wastewaters
Kaykioglu G, Coban A, Debik E, Kayacan BB, Koyuncu I
Desalination, 269(1-3), 254, 2011
3 Investigation of resole, novalac and coal tar pitch blended binder for the production of metallurgical quality formed coke briquettes from coke breeze and anthracite
Benk A, Coban A
Fuel Processing Technology, 92(3), 631, 2011
4 Molasses and air blown coal tar pitch binders for the production of metallurgical quality formed coke from anthracite fines or coke breeze
Benk A, Coban A
Fuel Processing Technology, 92(5), 1078, 2011
5 Reuse of anaerobically and aerobically pre-treated textile wastewater by UF and NF membranes
Debik E, Kaykioglu G, Coban A, Koyuncu I
Desalination, 256(1-3), 174, 2010
6 Phenolic resin binder for the production of metallurgical quality briquettes from coke breeze: Part III the effect of the type of acidic hardeners on the quality of the formed coke and the possibility to avoid the curing stage to produce metallurgical briquettes with enough strength
Benk A, Talu M, Coban A
Fuel Processing Technology, 90(7-8), 971, 2009
7 Phenolic resin binder for the production of metallurgical quality briquettes from coke breeze: Part I
Benk A, Talu M, Coban A
Fuel Processing Technology, 89(1), 28, 2008
8 Phenolic resin binder for the production of metallurgical quality briquettes from coke breeze: Part II the effect of the type of the basic catalyst used in the resol production on the tensile strength of the formed coke briquettes
Benk A, Talu M, Coban A
Fuel Processing Technology, 89(1), 38, 2008
9 Analysis of hydrogen in corrosion product films on molybdenum and niobium using ERDA technique
Coban A, Khaled MM
International Journal of Hydrogen Energy, 24(11), 1101, 1999
10 Hydrogen embrittlement of Ti-6Al-4V alloy with surface modification by TiN coating
Yilbas BS, Coban A, Kahraman R, Khaled MM
International Journal of Hydrogen Energy, 23(6), 483, 1998