| 1 |
Modeling of Slurry Bubble-Column Reactors with Emphasis on the Importance of Bubble Size Estimation
Dorostkar E, Khademi MH, Rahimi A
Chemical Engineering & Technology, 44(3), 417, 2021 |
| 2 |
Slug-to-churn vertical two-phase flow regime transition study using an interface tracking approach
Zimmer MD, Bolotnov IA
International Journal of Multiphase Flow, 115, 196, 2019 |
| 3 |
Beyond bubbly two-phase flow investigation using a CFD three-field two-fluid model
Sharma SL, Ishii M, Hibiki T, Schlegel JP, Liu Y, Buchanan JR
International Journal of Multiphase Flow, 113, 1, 2019 |
| 4 |
Assessment of the impact of bubble size modelling in CFD simulations of alternative bubble column configurations operating in the heterogeneous regime
Huang ZB, McClure DD, Barton GW, Fletcher DF, Kavanagh JM
Chemical Engineering Science, 186, 88, 2018 |
| 5 |
CFD simulation of pilot-scale bubble columns with internals: Influence of interfacial forces
Guan XP, Yang N
Chemical Engineering Research & Design, 126, 109, 2017 |
| 6 |
Impacts of dense heat exchanging internals on gas holdup cross-sectional distributions and profiles of bubble column using gamma ray Computed Tomography (CT) for FT synthesis
Al Mesfer MK, Sultan AJ, Al-Dahhan MH
Chemical Engineering Journal, 300, 317, 2016 |
| 7 |
A review on mechanisms and models for the churn-turbulent flow regime
Montoya G, Lucas D, Baglietto E, Liao YX
Chemical Engineering Science, 141, 86, 2016 |
| 8 |
Implementation of an improved bubble breakup model for TFM-PBM simulations of gas-liquid flows in bubble columns
Guo XF, Zhou Q, Li J, Chen CX
Chemical Engineering Science, 152, 255, 2016 |
| 9 |
A correlation for interfacial area concentration in high void fraction flows in large diameter channels
Schlegel JP, Hibiki T
Chemical Engineering Science, 131, 172, 2015 |
| 10 |
Chaotic Analogies in the Operation of Churn-Turbulent Bubble Columns and Bubbling Fluidized Beds
Nedeltchev S
Journal of Chemical Engineering of Japan, 45(9), 765, 2012 |
