| 1 |
Computational assessment of temperature variations through calibrated orifices subjected to high pressure drops: Application to diesel injection nozzles
Salvador FJ, Carreres M, De la Morena J, Martinez-Miracle E
Energy Conversion and Management, 171, 438, 2018 |
| 2 |
Experimental assessment of the fuel heating and the validity of the assumption of adiabatic flow through the internal orifices of a diesel injector
Salvador FJ, Gimeno J, Carreres M, Crialesi-Esposito M
Fuel, 188, 442, 2017 |
| 3 |
Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part I: Experimental mass flow rate measurements and discussion
Salvador FJ, Gimeno J, Carreres M, Crialesi-Esposito M
Energy Conversion and Management, 114, 364, 2016 |
| 4 |
Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis
Payri R, Salvador FJ, Carreres M, De la Morena J
Energy Conversion and Management, 114, 376, 2016 |
| 5 |
Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics
Salvador FJ, Carreres M, Jaramillo D, Martinez-Lopez J
Energy Conversion and Management, 103, 284, 2015 |
| 6 |
Analysis of the combined effect of hydrogrinding process and inclination angle on hydraulic performance of diesel injection nozzles
Salvador FJ, Carreres M, Jaramillo D, Martinez-Lopez J
Energy Conversion and Management, 105, 1352, 2015 |
| 7 |
A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles
Molina S, Salvador FJ, Carreres M, Jaramillo D
Energy Conversion and Management, 79, 114, 2014 |
| 8 |
Using one-dimensional modeling to analyze the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Results of the simulations and discussion
Salvador FJ, Gimeno J, De la Morena J, Carreres M
Energy Conversion and Management, 54(1), 122, 2012 |
