1 |
Effect of injection timing on modified direct injection diesel engine performance operated with dairy scum biodiesel and Bio-CNG Channappagoudra M, Ramesh K, Manavendra G Renewable Energy, 147, 1019, 2020 |
2 |
Effect of combustion chamber bowl geometry modification on engine performance, combustion and emission characteristics of biodiesel fuelled diesel engine with its energy and exergy analysis Karthickeyan V Energy, 176, 830, 2019 |
3 |
Comparative study of standard engine and modified engine with different piston bowl geometries operated with B20 fuel blend Channappagoudra M, Ramesh K, Manavendra G Renewable Energy, 133, 216, 2019 |
4 |
Combined effects of piston bowl geometry and spray pattern on mixing, combustion and emissions of a diesel engine: A numerical approach Khan S, Panua R, Bose PK Fuel, 225, 203, 2018 |
5 |
Numerical investigation on the combined effects of varying piston bowl geometries and ramp injection rate-shapes on the combustion characteristics of a kerosene-diesel fueled direct injection compression ignition engine Tay KL, Yang WM, Zhao FY, Yu WB, Mohan B Energy Conversion and Management, 136, 1, 2017 |
6 |
Modeling study on the effect of piston bowl geometries in a gasoline/biodiesel fueled RCCI engine at high speed Li J, Yang WM, Zhou DZ Energy Conversion and Management, 112, 359, 2016 |
7 |
Numerical investigation of piston bowl geometry and swirl ratio on emission from diesel engines Gafoor CPA, Gupta R Energy Conversion and Management, 101, 541, 2015 |
8 |
Optimization of combustion bowl geometry for the operation of kapok biodiesel - Diesel blends in a stationary diesel engine Vedharaj S, Vallinayagam R, Yang WM, Saravanan CG, Lee PS Fuel, 139, 561, 2015 |
9 |
Effects of piston bowl geometry on combustion and emission characteristics of biodiesel fueled diesel engines Li J, Yang WM, An H, Maghbouli A, Chou SK Fuel, 120, 66, 2014 |
10 |
Investigation of piston bowl geometry and speed effects in a motored HSDI diesel engine using a CFD against a quasi-dimensional model Rakopoulos CD, Kosmadakis GM, Pariotis EG Energy Conversion and Management, 51(3), 470, 2010 |