검색결과 : 15건
| No. | Article |
|---|---|
| 1 |
Cu(In,Ga)(Se,Te)(2) films formed on metal foil substrates by a two-stage process employing electrodeposition and evaporation Atasoy Y, Basol BM, Olgar MA, Tomakin M, Bacaksiz E Thin Solid Films, 649, 30, 2018 |
| 2 |
Effect of heat treating metallic constituents on the properties of Cu2ZnSnSe4 thin films formed by a two-stage process Olgar MA, Basol BM, Atasoy Y, Tomakin M, Aygun G, Ozyuzer L, Bacaksiz E Thin Solid Films, 624, 167, 2017 |
| 3 |
Cu(In,Ga)(Se,Te)(2) pentenary thin films formed by reaction of precursor layers Atasoy Y, Basol BM, Polat I, Tomakin M, Parlak M, Bacaksiz E Thin Solid Films, 592, 189, 2015 |
| 4 |
Electrodeposition of In-Se and Ga-Se Thin Films for Preparation of CIGS Solar Cells Aksu S, Wang JX, Basol BM Electrochemical and Solid State Letters, 12(5), D33, 2009 |
| 5 |
Structural, optical and magnetic properties of Zn1-xCoxO thin films prepared by spray pyrolysis Bacaksiz E, Aksu S, Basol BM, Altunbas M, Parlak M, Yamnaz E Thin Solid Films, 516(21), 7899, 2008 |
| 6 |
Effects of substrate temperature and post-deposition anneal on properties of evaporated cadmium telluride films Bacaksiz E, Basol BM, Altunbas M, Novruzov V, Yanmaz E, Nezir S Thin Solid Films, 515(5), 3079, 2007 |
| 7 |
Planar copper plating and electropolishing techniques Basol BM, Uzoh CE, Talieh H, Wang T, Guo G, Erdemli S, Cornejo M, Bogart J, Basol EC Chemical Engineering Communications, 193(7), 903, 2006 |
| 8 |
Study on mechanically induced current suppression and super filling mechanisms Basol BM, West AC Electrochemical and Solid State Letters, 9(4), C77, 2006 |
| 9 |
Planarization efficiency of electrochemical mechanical deposition and its dependence on process parameters Basol BM, Erdemli S, Uzoh CE, Wang T Journal of the Electrochemical Society, 153(3), C176, 2006 |
| 10 |
Mechanically induced growth rate differential for copper layers electroplated in presence of organic additives Basol BM, Durmus A, Wang T, Erdemli S, Bogart J Journal of the Electrochemical Society, 153(10), C683, 2006 |