1 |
Arundo donax L. can substitute traditional energy crops for more efficient, environmentally-friendly production of biogas: A Life Cycle Assessment approach D'Imporzano G, Pilu R, Corno L, Adani F Bioresource Technology, 267, 249, 2018 |
2 |
Impact of torrefaction and low-temperature carbonization on the properties of biomass wastes from Arundo donax L. and Phoenix canariensis Correia R, Goncalves M, Nobre C, Mendes B Bioresource Technology, 223, 210, 2017 |
3 |
The response of Arundo donax L. (C-3) and Panicum virgatum (C-4) to different stresses Sanchez E, Gil S, Azcon-Bieto J, Nogues S Biomass & Bioenergy, 85, 335, 2016 |
4 |
Are advantages from the partial replacement of corn with second-generation energy crops undermined by climate change? A case study for giant reed in northern Italy Cappelli G, Yamac SS, Stella T, Francone C, Paleari L, Negri M, Confalonieri R Biomass & Bioenergy, 80, 85, 2015 |
5 |
Perennial grass (Arundo donax L.) as a feedstock for thermo-chemical conversion to energy and materials Saikia R, Chutia RS, Kataki R, Pant KK Bioresource Technology, 188, 265, 2015 |
6 |
Non-isothermal pyrolysis characteristics of giant reed (Arundo donax L.) using thermogravimetric analysis Huang L, Chen YC, Liu G, Li SN, Liu Y, Gao X Energy, 87, 31, 2015 |
7 |
Biomass yield, nitrogen response, and nutrient uptake of perennial bioenergy grasses in North Carolina Palmer IE, Gehl RJ, Ranney TG, Touchell D, George N Biomass & Bioenergy, 63, 218, 2014 |
8 |
Energy characterisation of herbaceous biomasses irrigated with marginal waters Molari G, Milani M, Toscano A, Borin M, Taglioli G, Villani G, Zema DA Biomass & Bioenergy, 70, 392, 2014 |
9 |
Removal of several metal ions from aqueous solution using powdered stem of Arundo donax L. as a new biosorbent Song HL, Liang L, Yang KY Chemical Engineering Research & Design, 92(10), 1915, 2014 |
10 |
Nitrate removal from aqueous solution by Arundo donax L. reed based anion exchange resin Xu X, Gao BY, Zhao YQ, Chen SH, Tan X, Yue QY, Lin JY, Wang Y Journal of Hazardous Materials, 203, 86, 2012 |