| 1 |
3D printed spacers based on TPMS architectures for scaling control in membrane distillation
Thomas N, Sreedhar N, Al-Ketan O, Rowshan R, Abu Al-Rub RK, Arafat H
Journal of Membrane Science, 581, 38, 2019 |
| 2 |
3D printed triply periodic minimal surfaces as spacers for enhanced heat and mass transfer in membrane distillation
Thomas N, Sreedhar N, Al-Ketan O, Rowshan R, Abu Al-Rub RK, Arafat H
Desalination, 443, 256, 2018 |
| 3 |
Analytical techniques for boron quantification supporting desalination processes: A review
Farhat A, Ahmad F, Arafat H
Desalination, 310, 9, 2013 |
| 4 |
Effect of dry-out on the fouling of PVDF and PTFE membranes under conditions simulating intermittent seawater membrane distillation (SWMD)
Guillen-Burrieza E, Thomas R, Mansoor B, Johnson D, Hilal N, Arafat H
Journal of Membrane Science, 438, 126, 2013 |
| 5 |
How green solar desalination really is? Environmental assessment using life-cycle analysis (LCA) approach
Jijakli K, Arafat H, Kennedy S, Mande P, Theeyattuparampil VV
Desalination, 287, 123, 2012 |
| 6 |
Ultrafiltration of polysaccharide-protein mixtures: Elucidation of fouling mechanisms and fouling control by membrane surface modification
Susanto H, Arafat H, Janssen EML, Ulbricht M
Separation and Purification Technology, 63(3), 558, 2008 |
