| 1 |
Preparation and Characterization of Polypropylene Homocomposites: Exploiting Polymorphism of PP Homopolymer
Karger-Kocsis J, Wanjale SD, Abraham T, Barany T, Apostolov AA
Journal of Applied Polymer Science, 115(2), 684, 2010 |
| 2 |
Crystallization-induced shrinkage, crystalline, and thermomechanical properties of in situ polymerized cyclic butylene terephthalate
Harsch M, Karger-Kocsis J, Apostolov AA
Journal of Applied Polymer Science, 108(3), 1455, 2008 |
| 3 |
Polystyrene-fluorohectorite nanocomposites prepared by melt mixing with and without latex precompounding: Structure and mechanical properties
Siengchin S, Karger-Kocsis J, Apostolov AA, Thomann R
Journal of Applied Polymer Science, 106(1), 248, 2007 |
| 4 |
Effect of composition on transcrystallization with reorientation of polypropylene in drawn PET/PP blend
Apostolov AA, Evstatiev M, Denchev Z, Friedrich K, Fakirov S
Journal of Materials Science, 42(4), 1245, 2007 |
| 5 |
Compatibilizer effect of grafted glycidyl methacrylate on EPDM/organoclay nanocomposites
Gatos KG, Apostolov AA, Karger-Kocsis J
Materials Science Forum, 482, 347, 2005 |
| 6 |
The effect of organoclay on the mechanical properties and morphology of injection-molded polyamide 6/polypropylene nanocomposites
Chow WS, Ishak ZAM, Ishiaku US, Karger-Kocsis J, Apostolov AA
Journal of Applied Polymer Science, 91(1), 175, 2004 |
| 7 |
Morphology and mechanical properties of layered silicate reinforced natural and polyurethane rubber blends produced by latex compounding
Varghese S, Gatos KG, Apostolov AA, Karger-Kocsis J
Journal of Applied Polymer Science, 92(1), 543, 2004 |
| 8 |
Compatibilizing effect of maleated polypropylene on the mechanical properties and morphology of injection molded polyamide 6/polypropylene/organoclay nanocomposites
Chow WS, Ishak ZAM, Karger-Kocsis J, Apostolov AA, Ishiaku US
Polymer, 44(24), 7427, 2003 |
| 9 |
Strain-induced polymorphic transition in PBT and PBT/PEE blend as revealed by synchrotron radiation
Apostolov AA, Fakirov S, Pavlov M, Stribeck N
Journal of Materials Science Letters, 21(2), 145, 2002 |
| 10 |
Rotationally molded polyethylene: Structural characterization by x-ray and microhardness measurements
Cramez MC, Oliveira MJ, Fakirov S, Crawford RJ, Apostolov AA, Krumova M
Advances in Polymer Technology, 20(2), 116, 2001 |
