| 1 |
Thermodynamic and turbomachinery design analysis of supercritical Brayton cycles for exhaust gas heat recovery
Uusitalo A, Ameli A, Turunen-Saaresti T
Energy, 167, 60, 2019 |
| 2 |
Characterization of hard-segment crystalline phase of thermoplastic polyurethane in the presence of butane and glycerol monosterate and its impact on mechanical property and microcellular morphology
Hossieny N, Shaayegan V, Ameli A, Saniei M, Park CB
Polymer, 112, 208, 2017 |
| 3 |
Conductive network formation and destruction in polypropylene/carbon nanotube composites via crystal control using supercritical carbon dioxide
Kazemi Y, Kakroodi AR, Wang S, Ameli A, Filleter T, Potschke P, Park CB
Polymer, 129, 179, 2017 |
| 4 |
Poly(lactic acid)-Based in Situ Microfibrillar Composites with Enhanced Crystallization Kinetics, Mechanical Properties, Rheological Behavior, and Foaming Ability
Kakroodi AR, Kazemi Y, Ding WD, Ameli A, Park CB
Biomacromolecules, 16(12), 3925, 2015 |
| 5 |
Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors
Ameli A, Nofar M, Jahani D, Rizvi G, Park CB
Chemical Engineering Journal, 262, 78, 2015 |
| 6 |
Development of polylactide bead foams with double crystal melting peaks
Nofar M, Ameli A, Park CB
Polymer, 69, 83, 2015 |
| 7 |
The interfacial tension of molten polylactide in supercritical carbon dioxide
Mahmood SH, Ameli A, Hossieny N, Park CB
Journal of Chemical Thermodynamics, 75, 69, 2014 |
| 8 |
Characterization of Expanded Polypropylene Bead Foams with Modified Steam-Chest Molding
Hossieny N, Ameli A, Park CB
Industrial & Engineering Chemistry Research, 52(24), 8236, 2013 |
| 9 |
Characterization and prediction of fracture properties in hygrothermally degraded adhesive joints: an open-faced approach
Ameli A, Azari S, Papini M, Spelt JK
Journal of Adhesion Science and Technology, 27(10), 1080, 2013 |
| 10 |
Analysis and design of adhesively bonded joints for fatigue and fracture loading: a fracture-mechanics approach
Azari S, Ameli A, Papini M, Spelt JK
Journal of Adhesion Science and Technology, 27(15), 1681, 2013 |
